Page 1 of 1
6n2 standard front lip
Posted: Fri Nov 30, 2007 11:59 am
by polopowah
Hi guys
Whats the best way of getting the front (black) spoiler lip off?
i assume its clipped on?
any tips would be great
thanks
-Ben-
Posted: Fri Nov 30, 2007 12:55 pm
by alexperkins
Bumper off
Much easier that way. It clips in - you need to work from one side round to the other very carefully! Gentle pressure works well.
Posted: Fri Nov 30, 2007 12:57 pm
by polopowah
how hard and what time scale am i looking at getting the front bumper off mate?
i have a haynes manual so that may help abit
-Ben-
Posted: Fri Nov 30, 2007 12:59 pm
by Redline
Alternatively, jack the front of the car up and support it on axle stands, so you can get underneath and to the back of the bumper.
Then it is simply pushing the clips out. Don't forget the screw at either end located at the front of the wheel arch.
Posted: Fri Nov 30, 2007 1:10 pm
by alexperkins
polopowah wrote:how hard and what time scale am i looking at getting the front bumper off mate?
i have a haynes manual so that may help abit
-Ben-
look in DIY guides under sidelight replacement - its super simply
Posted: Fri Nov 30, 2007 2:53 pm
by polopowah
thanks for all the responses guys
-Ben-
Posted: Fri Nov 30, 2007 7:21 pm
by loud
i just took out the screws at either side then used a thin screwdriver to pop the first couple of clips out, then the rest just came out with a little pull
Posted: Sat Dec 01, 2007 8:06 am
by polopowah
okie dokies, fitting my ibiza splitter today hopefully! finally its stopped raining here
-Ben-
Posted: Sat Dec 01, 2007 5:36 pm
by Bepe
were ddid you get it from and how much? post some pics up
Posted: Sat Dec 01, 2007 9:43 pm
by polopowah
yo
i got it from a Seat dealer for like 14 pounds something so it was nice and cheap.
haven't got round to fitting it yet though!
-Ben-