Page 1 of 1
do right hand drive angel eyes exist?
Posted: Mon Dec 10, 2007 3:34 pm
by JoeG07
Now its dark the majority of the time, im getting a bit fed up of my damn left hand drive angel eyes that dazzle everyone. Do right hand drive ones exist, or am i gonna have to put up with these menaces?
Posted: Tue Dec 11, 2007 2:07 pm
by Mk4 Polo MPI
Posted: Tue Dec 11, 2007 7:34 pm
by 8080
It's a long shot, but you might be able to switch the plates inside the projectors around. Might help a bit, but not solve the problem completely
Code: Select all
RHD plates are like this, to light up the ditch
DITCH OTHER CARS
________
Metal \_______
Metal Metal Metal
BULB
LHD plates are like this
DITCH OTHER CARS
___________
______/ Metal
Metal Metal Metal
BULB
i know this looks mental, but anyways...
Posted: Fri Dec 21, 2007 12:20 am
by tomo87
i had RHD angel eyes on my mk4.....i had the 2piece black FK ones
Posted: Fri Dec 21, 2007 1:52 am
by kipper
Posted: Wed Jan 02, 2008 5:35 pm
by eileenk
there are several authentic RHD angel eyes for sale on ebay was just looking at them
Posted: Wed Jan 02, 2008 11:03 pm
by septic
Mine are RHD
Posted: Wed Jan 02, 2008 11:12 pm
by mmh
I know you can get the one piece headlamps eg. the Ultra ones with the integrated indicator in RHD or LHD as they often have a lever to adjust them.
Can anyone confirm for sure that you can get the FK glass fronted angels or powerlook lights with separate indicator in RHD for the 6n? I know the 6n2 versions of these have a LHD to RHD adjuster lever.
I've seen many sellers on eBay etc. say they are RHD but I contacted Rimstyle a FK official UK dealer who said for the Polo 6n they were only in LHD.
I've heard rumours there is a way to mod them but I have not found any definitive details on this...can anyone shed some light, as it were
Thanks,
M
Posted: Thu Jan 03, 2008 12:25 am
by JoeG07
nearest i found out was
Take the 4 skrews out the glass eye thing comes off, and the plate is rite there, flik is over and atatch glass eye thing, then scrape of the old sealent, and put plastic lens back on puting sealent on the seal, re-clip and job is good one.
Posted: Thu Jan 03, 2008 12:52 am
by mmh
JoeG07 wrote:nearest i found out was
Take the 4 skrews out the glass eye thing comes off, and the plate is rite there, flik is over and atatch glass eye thing, then scrape of the old sealent, and put plastic lens back on puting sealent on the seal, re-clip and job is good one.
Hi,
Have you got a link to that info?
Cheers