UK-POLOS.NET - THE VW Polo Forum

ok i get the info with the bumper now. it was just a thought but aint gonna do it.

but i do now have another problem now. when i used to use my boot popper it would unlock it straight away and then i could just open it, however now i have to press the button, pull the boot a bit to bring it out then press the button again then pull the boot to open it fully.

was wondering if anyone knows y or how this happened? i keep checking the cables and it seems fine. also does anyone have any pics of how they popper is placed in the boot and wired up to the boot mechanism so i can check it against mine.

are we talking some sort of aftermarket boot popper? or the standard cable and latch on 6N2s?

mine doesd something similar to this, cause its cold mate

yes its an aftermarket one. didnt know polos can have poppers on them?

does that mean its nothing to do with the springs in the latch or the popper not being set up properly?

sorry think i'm a bit lost! whats a boot popper by definition?

I thought you were on about the standard boot release method on 6N2s!

solenoid on the boot mechanism which 'pops' the boot lid open basically

wat alex said. its something u use when u smooth the boot.... can do it with the doors to but i believe u use different ones for the doors due to the power or something....

so anyone know for sure if it is cause its cold then or something else wrong?

arite yeh yeh i know what your on about, sorry i thought you were on about 'bonnets' not 'boots' and was like "whats a bonnet popper?!"

haha sorry bout that

I'v not once had a problem with my boot popper! Been spot on since the day i fitted it! Made by a company called Eagle Security....decent bit of kit

i know i asked u this befor but would u be able to get pics of where the solenoid is mounted and how its wired up to the boot mechanism? (dee-vub)

i think this is where i have got it wrong somewhere.