Page 1 of 3
Whos running 16" BBS RX2's
Posted: Mon Feb 04, 2008 11:53 pm
by chrisgti6n2
Hi guys
Picked up a set of BBS RX2's tonight, the 16 inch version from a mk3 golf I'm lead to believe
Anyway I've seen a few other folk run these, are there any rubbing problems? my cars lowered about 40mm
Are 195/40/16 tyres the right size to run?
Any help is much appreciated guys
Cheers chris
Posted: Mon Feb 04, 2008 11:55 pm
by Redline
I have them.
Yeah 195/40/16 are the size you really want for the best rolling radius match. Problem is there aren't many tyres made in that size, and the best ones tend to be expensive.
Lowered 40mm you should be fine, can't see you having any problems with rubbing at all.
Posted: Tue Feb 05, 2008 12:01 am
by chrisgti6n2
Brilliant, well chuffed to hear that
195/40/16 toyo proxie T1R's are 50 quid a corner off mytyres, and a mate of mine back home will fit um for free
With any luck one of my mates will be able to get those tyres a bit cheaper, hes gonna find out for me this week
Dunno what colour to go for refurb wise :S standard silver or kina gloss black, if i went gloss black would get the front and back black VW badges aswell as a couple other bits
What do you guys think?
Anybody got any pics

say a thousand words and all that
Cheers chris
Posted: Tue Feb 05, 2008 1:09 am
by Tim_GTi
what colours your car mate?
I've got a stack of pics, but my laptop died 2 hours ago
Should have it sorted tomorrow, i'll try fish some out then if no has before hand
Posted: Tue Feb 05, 2008 2:59 am
by pologti76
I got a set of 16 inch rxII's from ebay but i havnt fitted them yet why are people getting scrubbing as they are only half an inch wider than the 15 inch rxII's i wondered as the tyres that are on the wheels are 205/45/16 but my summer wheels are d90's 7x16 and 8x16 and i dont get any scrubbing unless i go over a really bumpy road. will i get alot of scrubbing as my car is lowered 100mm on the rear and about 80 on the front.
Posted: Tue Feb 05, 2008 10:24 am
by chrisgti6n2
My car is silver and lowered about 40mm, im running coilovers
Pics would be cool mate
Cheers
Posted: Tue Feb 05, 2008 12:26 pm
by DanDiesel
the 16" RXii come in 4 and 5 stud versions and are both off the mk3 golf. the 4 stud versions come off the mk3 cabriolet and the 5 stud versions come off themk3 golf 20th anniversary (the ones i have on my Ibiza).
just make sure you have the correct stud pattern.
Posted: Tue Feb 05, 2008 12:45 pm
by chrisgti6n2
DanDiesel wrote:the 16" RXii come in 4 and 5 stud versions and are both off the mk3 golf. the 4 stud versions come off the mk3 cabriolet and the 5 stud versions come off themk3 golf 20th anniversary (the ones i have on my Ibiza).
just make sure you have the correct stud pattern.
yeah the ones i got came off a cabriolet the boy had
checked the pcd and offset before i took them
role on the refurb and new rubber, cant wait to get them on

Posted: Tue Feb 05, 2008 1:29 pm
by shantybeater
infact being the smart arse...the 16" RXII's in 4 stud came off the rare mk4 golf cabriolet avantgarde.....bet you are all chuffed to know that now hehe, how much did you pay for them?? they are vvvvvv.rare!
I had mine running on 205/45/16 for a while at standard height and got alot of rubbing...
Posted: Tue Feb 05, 2008 1:44 pm
by Mouse_GTI
PM'd

Posted: Tue Feb 05, 2008 1:59 pm
by Tim_GTi
chrisgti6n2 wrote:My car is silver and lowered about 40mm,
Personally I'd stick to a silver finish (or some sort),
I've never been a fan of black on silver in terms of wheels and rear badges, the front badge is a different matter though
My laptops still not up and running but you can see RXII 16"s here on Matts old car coated in "Chromium"
http://www.tigerstyle.co.uk/poloforum/v ... highlight=
Also here (about halfway down the page) they're on James' old GTi, in black
http://www.tigerstyle.co.uk/poloforum/v ... 0&start=15
Posted: Tue Feb 05, 2008 3:56 pm
by chrisgti6n2
They stung me £175 which i would say is pretty good as they are really good nick, not much kerbing at all, mostly unblemished original paint and 3 spanking new 205 45 16 federal tyres which ill sell i think, i dont need them, also gona end up with a spare set of alloys and two as new proxie t1r 195 45 16's lol
still gonna have them redone, think i will go silver
and new 195 40 16 tyres, theyll be mint
Whats the standard tyre size on a polo gti?
Posted: Tue Feb 05, 2008 3:58 pm
by Redline
£175? Wow thats an absolute bargain!
And standard GTi tyres/wheels are 195/45/15
Posted: Tue Feb 05, 2008 4:02 pm
by shantybeater

I paid £600 for mine! but they were new
Posted: Tue Feb 05, 2008 4:48 pm
by chrisgti6n2
Well ill be another 200 for tyres then fitting aswell
And whatever it costs to have them refurbed, think ill have a blast myself
So im sure theyll end up costing in the region of 4 to 600 but ill have a really nice set of wheels so dont mind
and ill have a set of alloys and 5 as new tyres to sell on so recoup a bit that way