Page 1 of 1
A FEW QUESTIONS.....
Posted: Tue Feb 03, 2004 4:44 pm
by blackmk3
i have had my mk3 now for about 5 months (my first car) and there are some questions i would like to be helped out with.
1. Can i fit a set of 16's on without rubbing or big modifications?
or do i need 15's instead?
2. How can i put front and back golf spoilers onto my car?
3.Can anyone tell me how to convert from 2 windscreen wipers to 1?
4. Are the DTM sports mirrors easy to fit, as i know you have to do something with baseplates.
5. Can anyone confirm pipercross make and induction kit for the 1.3?
PLEASE HELP!
Re: A FEW QUESTIONS.....
Posted: Tue Feb 03, 2004 5:14 pm
by KarlM
blackmk3 wrote:
1. Can i fit a set of 16's on without rubbing or big modifications?
or do i need 15's instead?
16s will fit, but as far as i'm aware you will need to do a bit of surgery to make them fit. 15s are a safer bet (and look better imo), but it depeands on tyre selection and suspension set up
2. How can i put front and back golf spoilers onto my car?
check in DIY as section as i put a post in there with a link to a guide
3.Can anyone tell me how to convert from 2 windscreen wipers to 1?
easiest thing to do is buy a single wiper kit from someone like R&A Design or Venom motorsport
4. Are the DTM sports mirrors easy to fit, as i know you have to do something with baseplates.
As long as you get the correct baseplates its a simple bolt on mod (just removed the screws)
5. Can anyone confirm pipercross make and induction kit for the 1.3?
I haven't seen one, but do a search on google for pipercross' website, that should tell you
Posted: Tue Feb 03, 2004 5:55 pm
by LogIK
Can anyone tell me how to convert from 2 windscreen wipers to 1?
Click
Here and goto the "Styling/Interior" section and third from the bottom is a comprehensive article on how to do this mod.
Posted: Tue Feb 03, 2004 9:46 pm
by polo_GT
you can not get hold of any dtm mirrors in england that fit the mark 3 you have two import them through venom from germany and only one of them will fit being left hand drive. They cost a ripp off 95 quid.
Another option is to buy some ripspeed dtm mirrors from halfords for about 40-50 and you get a sheet of stirophone which u can cut to fit for the base plate.