Page 1 of 1
Power for my Sony MD player
Posted: Wed Feb 04, 2004 11:09 am
by msmartinwsx
OK then. In my N reg polo - When I turned the engine off, I could still have the radio on full.
However, I can only do this in my 9n when the engine has been on (and the key in the ignition). As soon as I take the key out - the power is fuzzed
Anyways of getting it to stay on?
Matt
Posted: Wed Feb 04, 2004 11:10 am
by msmartinwsx
Also.
Just seen another post that has the same problem but the opposite of me
I have changed the yellow/red wires around - no joy
M
Posted: Wed Feb 04, 2004 2:16 pm
by david burton
Yours is properly wired up at the mo - to do it your way you need to take the constant power wire and feed it into BOTH terminals rather than swap em around. Do you have a multimeter? I don't know which colour is what....
Posted: Wed Feb 04, 2004 2:51 pm
by msmartinwsx
Nope I dont
M
Posted: Wed Feb 04, 2004 5:03 pm
by Nelson
That'll have been my post then!!
Mine's is sorted now.
John.
Posted: Sat Feb 07, 2004 4:21 pm
by Blk6N
If it's a Sony MD then join the red wire to the same source as the yellow. The Y should be perm 12V+ and the R a switched feed from ign.
Or leave the key in
