UK-POLOS.NET - THE VW Polo Forum

is there a guidance thread on how 2fit?

how do u clean then?

There is a guide in diy guides. Clean with the special BMC cleaner fluid thats the only way to do it properly.

http://www.tigerstyle.co.uk/poloforum/v ... hlight=bmc

Haven't read the thread because the pictures won't load! May help though.

And don't forget the uprated cold air feed

http://www.tigerstyle.co.uk/poloforum/v ... hlight=bmc

It's dead easy, if you have any problems drop me a line

Tim_GTi wrote:http://www.tigerstyle.co.uk/poloforum/v ... hlight=bmc

Haven't read the thread because the pictures won't load! May help though.

And don't forget the uprated cold air feed

http://www.tigerstyle.co.uk/poloforum/v ... hlight=bmc

It's dead easy, if you have any problems drop me a line

cheers tim for the last link, ive had a look today but i need a new 90degree hose,(any ideas) only got it today and want it fitting :(

Yeh you will, I think Halfords do one, scout eBay also, also of other palces should do it, venomsports?

do u normally get one when buying one brand new?

any pics on how u fitted ur breather cap?

No not necessarily, a lot of people do a deal with the whole kit though (90% pipe and breather filter)

I fitted my breather filter using Ice Hockey tape, it's like sticky cloth and simply wrapped it around the pipe and breather, it's a really sturdy.

Most breathers come the same diameter as the pipe, so you may have to find a copper sleeve or something to fix it in place.

poor response wasnt intended was just in a rush

alexperkins wrote:poor response wasnt intended :P was just in a rush

no worries matey :P