My 9n system
Posted: Tue Apr 08, 2008 12:11 am
Started putting my audio in the new whip over the weekend.
First job was to build a box , i used RE AUDIO'S program on my pc to get the size right and matched to the spec of my sub (great if ya building your own box) , then got some 18mm MDF cut to my cutting plan and started on the 8 hour mission of building it
.
My audio is as follows - Head unit - Nakamichi cd400 ,may leave std one in for that WTF factor ,
Sub - Kicker L7 12" square
Amp - Kicker Kx500.2
Box - L ported 3.2 cuft tuned to 33.8htz
Thats it for now comps next but first job get it all set up this weekend and then i can see , might be abit to much Bass what ya think .
Hope it kills my spleen and pops windows when it's all up and running then i'll be mega happy
First job was to build a box , i used RE AUDIO'S program on my pc to get the size right and matched to the spec of my sub (great if ya building your own box) , then got some 18mm MDF cut to my cutting plan and started on the 8 hour mission of building it
. My audio is as follows - Head unit - Nakamichi cd400 ,may leave std one in for that WTF factor
,Sub - Kicker L7 12" square
Amp - Kicker Kx500.2
Box - L ported 3.2 cuft tuned to 33.8htz
Thats it for now comps next but first job get it all set up this weekend and then i can see , might be abit to much Bass
what ya think .Hope it kills my spleen and pops windows when it's all up and running then i'll be mega happy
it's RE AUDIO enclosure calculator , i'd post it up for you but my sort cut on mi desk tops not working , you could try the re audio web site or 