Page 1 of 1
The numbers confuse me...
Posted: Tue Apr 15, 2008 11:24 am
by Andy1.6
Will these wheels fit my 6n?
http://cgi.ebay.co.uk/RONAL-TURBO-WHEEL ... dZViewItem
Looking for a project to refurb them!
Thanks
Posted: Tue Apr 15, 2008 12:59 pm
by NOZ
Certainly will mate. Think you should hold on to your cash and get something better cos turbo's are soooooo common now and getting really boring to look at.
Posted: Tue Apr 15, 2008 1:01 pm
by Andy1.6
Thanks for the help!
I will think about it! But if the price is right!
Posted: Thu Apr 17, 2008 5:34 pm
by Andy1.6
So anything that is 4 stud will fit? Unless its huge like 17inch?
Im going to try and get some mk2 golf bbs 15inch tomorrow. Will they be ok?
Posted: Thu Apr 17, 2008 6:25 pm
by carerra91
not any 4 stud rim mate, they need the right stud pattern, namely 4x100 for polos
Posted: Thu Apr 17, 2008 6:29 pm
by Shmosh
lol i made that mistake, bought some 4x108
was so annoyed, i have since bought and fitted 4x100 ones some time ago, but the unfittable ones just lie on my floor collecting dust!
Posted: Thu Apr 17, 2008 6:30 pm
by Andy1.6
Painful topic then? Ok so will golf mk 2 alloys fit?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=001
These?
Posted: Thu Apr 17, 2008 6:31 pm
by carerra91
i dont know what car fits 4x108 but find out and stick em on that kind of forum i guess, that should have em gone sharpish!
Posted: Thu Apr 17, 2008 6:32 pm
by Shmosh
108 i have found out fits fords and peugots! i was so gutted. O well im advertising them at the moment.
Posted: Thu Apr 17, 2008 6:36 pm
by carerra91
Posted: Thu Apr 17, 2008 6:38 pm
by Andy1.6
Thanks for your help!
Posted: Fri Apr 18, 2008 12:10 am
by NOZ
You need:
PCD: 4x100
Centre Bore: 57.1mm
Offset: 35-38 (recommended)
mk1,2,3 Golfs have the same PCD I believe as my old BBS RA's used to belong on a mk2 and I always see them on mk3's.
The CB's the same for all VW. If you get rims with a larger CB then you can insert spigot rings to make up the difference of the CB.