Page 1 of 1
hub/wheel adapters?
Posted: Tue Apr 15, 2008 2:28 pm
by M@Turner
Whats the smallest size in spacing you can get with 5x100 - 5/112.
Have seen some 15mm FK ones but think that maybe too much with the alloys i'm looking at been 7x17 offset 47!!!
Can anybody share some knowledge please?
Posted: Tue Apr 15, 2008 2:56 pm
by Tim_GTi
I think 15mm will probably be fine mate.
What size tyres are you running?
Posted: Tue Apr 15, 2008 3:14 pm
by M@Turner
Tyres currently on are 225/45/17 but i'll change them pretty soonish for either 205/40 if i got them!
Posted: Tue Apr 15, 2008 3:28 pm
by Tim_GTi
yeh with 205/40s you should be fine, will give you a nice mean stance after lowering
Posted: Tue Apr 15, 2008 3:29 pm
by Tim_GTi
Just found this pic, you shoudl keep your alloys!
Posted: Tue Apr 15, 2008 3:38 pm
by M@Turner
That does look really nice, but its been done already!!!
Think thats why i want something different!!
Still unsure what i'm doing (depends on job prospects), but if i have all the info i need should i go down the mods route, it can get done really quickly!
By my reckoning, £1000 is roughly what it would cost for future mods!
Posted: Tue Apr 15, 2008 5:51 pm
by Tim_GTi
I worked mine out (made a little word doc on it
), and my mods list for 2008 adds up to about £850! and that's not budgeting for interior if I bump into any!