Page 1 of 1
Polo 6n leathers
Posted: Sun Apr 27, 2008 11:47 pm
by pololady
Hi there. I got a 97 1.4 16v. I know it's very unlikely. But if anys1 got any leather seats then I would love to put them in my polo
Posted: Mon Apr 28, 2008 4:31 am
by Tim_GTi
Look out for Golf mark3 highlines, or cupras. They're your best bet
Posted: Sun May 04, 2008 1:32 am
by pololady
As in new cupras? There's some on ebay from a 2003 cupra but they are electric. Would they fit do you know?
Posted: Sun May 04, 2008 3:24 am
by Tim_GTi
Yeh Cupras,
They possibly would, i'd have to see them though, eBay link?
Posted: Sun May 04, 2008 3:14 pm
by pololady
Posted: Sun May 04, 2008 3:22 pm
by Tim_GTi
Ahh they're from a leon, I was referring to the Ibiza.
umm my instinct would say they'd be too wide, but I don't know.
Posted: Sun May 04, 2008 3:33 pm
by pololady
oh, is there anyway of finding out?
Posted: Sun May 04, 2008 3:40 pm
by Tim_GTi
umm.. well for the fronts it's just a case of will they literally fit, because all you need is custom subframes and you can fit anything you like in there. So asking for height and width measurements, to see if they fit your car should be ok.
Backs are harder, there's a alot to think about, and the only real way of being certain is to check them out in person and size them up.
Posted: Mon May 05, 2008 11:00 am
by adam_0612
would they fit a 6n2?
Posted: Tue May 06, 2008 9:05 pm
by Tim_GTi
adam_0612 wrote:would they fit a 6n2?
I reckon no, (because of the width) but doing what I said above will help confirm