UK-POLOS.NET - THE VW Polo Forum

hello
does any body have the pics to go along with the guide for fitting oem fogs onto 6n2 by any chance?, (was written by polo2k years ago).
just dont want to go yanking wires and stuff

Its easy peasy to do

To change the switch - push the headlight switch in and turn to sidelights, then it will pull out with gentle force

To fit the lights, the wiring is already in there. You just need to unclip it from its blanks mounted on the chassis - you can see them if you have a look under the bumper or through the fog opening.

Then fit the three split plastic inserts into the bumper, attach the cable to the back of each fog light, then screw in place

All that is left is to test them, and adjust to ensure the beam is the right height.

Hope this helps - any more help just ask

alexperkins wrote:Its easy peasy to do

To change the switch - push the headlight switch in and turn to sidelights, then it will pull out with gentle force

To fit the lights, the wiring is already in there. You just need to unclip it from its blanks mounted on the chassis - you can see them if you have a look under the bumper or through the fog opening.

Then fit the three split plastic inserts into the bumper, attach the cable to the back of each fog light, then screw in place

All that is left is to test them, and adjust to ensure the beam is the right height.

Hope this helps - any more help just ask

thank you mate got the switch done but got a bit dark to do the rest so will have to do 2mo!!! cant wait until its done tho, hopefully no prob will come up