Page 1 of 1
Alloys and tyre stretching
Posted: Thu May 08, 2008 3:42 pm
by adam_0612
Right i am buying some new alloys so just wont a bit of advice please
I am getting 7" wide and want tyres tretching on them. What size tyre would look good stretched on them.
I got told this
As for the stretched tyres, the only tyre that 'really' stretches on a 7x15 is a 165/50-15 but some people think this tyre is too small. So a 195/45-15 Falken ZE512 has the appearance of being stretch thanks to it sidewall design.
What you guys reckon, also you got any pictures of tyres that been stretched and there sizes on 7" wheels
thanks
Posted: Thu May 08, 2008 3:52 pm
by david burton
175s will probably do the job
Posted: Thu May 08, 2008 5:31 pm
by MaxZ
195/45s will not look stretched on a 7, I've got them on a 7.5 and the stretch is minimal.
I'd go for either 185/45s decent stretch, or 165/50 Bridgestones Very nice stretch
Posted: Thu May 08, 2008 6:34 pm
by Tim_GTi
yeh 165/50s do a decent stretch from what I've seen,

Posted: Thu May 08, 2008 7:03 pm
by adam_0612
think ill go with the 165/50s then. any idea on what a price would be?
Posted: Thu May 08, 2008 7:25 pm
by Tim_GTi
I think they're more expensive than the average, because they're an odd size to buy. And there's less variety. I've never looked for them before so wouldn't know of exact prices of places to purchase.
Posted: Thu May 08, 2008 8:00 pm
by MaxZ
Potenza RE 040 165/50 R15 73V KZ 38 pounds delivered
NS-2 165/50 R15 72V TW £ 29.10 delivered
www.mytyres.co.uk
Posted: Fri May 09, 2008 3:24 pm
by adam_0612
thanks MaxZ
right the alloys i want come in et35 and et30
what is the difference of these?
thanks
Posted: Fri May 09, 2008 10:28 pm
by david burton
how wide are they? I think you will want ET30 as these will stick out 5mm more.
Posted: Sat May 10, 2008 8:46 am
by adam_0612
they will be 7" wide
and what do you mean by stick out more. which part of the alloy are you refering to, the spokes???
thanks
Posted: Sun May 11, 2008 10:05 pm
by adam_0612
Posted: Mon May 12, 2008 3:55 pm
by david burton
the whole alloy will be 5mm further out from the hub.
ET30 should be fine with 7" wide wheel. You might even want spacers if you have a 175 tyre.
Posted: Tue May 13, 2008 12:26 am
by Tim_GTi
Yeh definitely go with the et30s mate