Page 1 of 1

Crossover hell

Posted: Wed May 14, 2008 12:33 pm
by Polo_rolo
Little help please....

I've just replaced the original door speakers and tweeters (6N Polo - 16v) with an Infinity component set. I still need to fit the crossovers which is the only obstacle left. Does anyone know the best place to put them and if I need to remove the underside of the dash to access the wiring?

Cheers!

Posted: Wed May 14, 2008 1:23 pm
by iggy350
Hum I saw a post once where the person just taped them to the door padding behind the door card. but i suppose if ur putting the tweeters in the original positions that wouldnt be a good idea. But if you are going to cut a hold in the door cards for ur tweeters I'd go for that idea :)

If i can find the guide ill post u the link

Posted: Wed May 14, 2008 3:14 pm
by Polo_rolo
Thanks for that, think I remember seeing that PDF guide where the tweeters were next to the door speakers but I'm putting them in the original holes on the dash.

Anyone know about removing the dash underneath to get at the stereo wiring?

Posted: Wed May 14, 2008 5:26 pm
by david burton
I put the crossovers in the space under the current tweeters..... nice and snug

Posted: Wed May 14, 2008 8:56 pm
by Tim_GTi
Image

That's what they look like in the doors