Page 1 of 1
UpDate - Lowerd!
Posted: Tue May 20, 2008 6:21 pm
by vw-po-low
Posted: Tue May 20, 2008 7:44 pm
by jonnopolo
It's coming along nicely. Getting quite a mean stance to it. Really like it!
Posted: Tue May 20, 2008 8:17 pm
by randomage
sweet
get the back down a bit more and itll be mean
Posted: Tue May 20, 2008 10:29 pm
by carerra91
how much is that lowered by mate?
Posted: Tue May 20, 2008 11:04 pm
by vw-po-low
60mm all around, it has to settle yet, only just been done. i dont know if the back is at 60 or will be 60 when on the bottom notch. Back end will be done soon, when i get around to it. thanks for the cmments.
Posted: Wed May 21, 2008 9:31 am
by NOZ
Very nice mate, another 10mm front and back I say!
All you need to do is get clear indicators and remove the bumpstrip. Also black the VW badge on the grille.
Posted: Wed May 21, 2008 6:34 pm
by carerra91
Looks really tidy, what's the front splitter off?
Posted: Wed May 21, 2008 6:39 pm
by Tim_GTi
Very nice mate! another 10mm would be sweet though
also 10mm spacers on teh backs if the arches permit it
Posted: Wed May 21, 2008 6:47 pm
by Josh_polo
Looks sweet
carerra91 wrote:Looks really tidy, what's the front splitter off?
Looks standard to me
Posted: Sat May 24, 2008 3:39 pm
by vw-po-low
Standard front splitter. you think i could persuade a cupra R splitter onto it? Polo bade odd the back is being removed, keeping the VW grill badge, to many around my area with badgeless ones. ha. clear side repeators and front indecators to come. Oh and yes, i think the rear will end up on the last notch. Bump strips will be removed in due time. keep thinking about valver bumpers and smoothing the front one totally. Any ideas would be great, thanks for the comments eveyone.
Posted: Sun May 25, 2008 7:13 pm
by Tim_GTi
Pressed plates?
