This is really bugging me - help!
Posted: Sun May 25, 2008 8:08 pm
I know this is silly but where does the mounting bracket holding the wiring for lambda probe (downpipe one) bolt on! The most obvious place seems to be the gearbox bolt but this is too big to thread through the hole on the bracket.
Have checked ETKA but it's no good...
Could somebody please post a closeup pic showing exactly where it shoud go - this would be much appreciated!
Have checked ETKA but it's no good...
Could somebody please post a closeup pic showing exactly where it shoud go - this would be much appreciated!