UK-POLOS.NET - THE VW Polo Forum

so after work today the weather was glorious, a perfect chance for some more post detailing photos, better ones, to show off true shine and reflection

so i got the car out of the garage, as its been in there for a few days as i have been doing a few more little engine bits and cleaning it in general

Forge FMIC and big rear brake conversions are next on the list to be sorted this summer, which im sure they will be, then stage 2 map, to run a healthy 240 - 250 bhp, nothing too silly, may even just stick to the stage 1 map and run 225 - 230 bhp, either way then ill be leaving it i think (famous last words)

so here she is, hope you all like,

















and a not so amazing moving shot


opinions welcomed as always,
cheers, jeff

very clean as always nice mods to engine keepin them subtle with the black forge pipes!

very nice shots. should be taking mine up to awesome in the summer for them to do the lot on it i.e. remap, lowering, exhaust system etc should be good. have they got the stage 2 map out?

What do u clean ur engine bay with Jeff? Ave never cleaned mine should probably start!

yeah awesome are the ones to use as far as im concerned, and the stage 2 map by apr will be developed once the front mount is released by forge and is a more common mod

it will happen, so dont worry

kenny, i used AG engine and machine cleaner 50/50 diluted to do the initial clean up when i got it, then autosol on the aluminium parts, AG vinal and rubber care on the blacks, applied everywhere with a fine paint brush, and zymol on the painted parts, started with the cleaner wax, then now i use carbon

Well it looks good mate! Only part of ma car ave never cleaned (apart from the boot) so gonna give it a clean sometime this week

lookin very clean jeff

lookin good mate!

you still need to clean my white one! haha

have you started wet sanding and pc-ing yet?

if you fancy it, some chav bent fcker (still peeved off? - yes i am lol) keyed my dads passat that could do with a quick buff up and sand?

Done my engine bay today while clayin and waxin ma car bare in mind ma engine bay hasnt been done in nearly 2yrs lol

sexuall buddy, mine needs a clean in the bay after fitting my coilies as it oily!

looking good kenny, do that a few times and it will get to a point where its dead easy to do,

just a quick blip over with a damp cloth then treat the different areas seperatly

Cheers guys. The engine bay is still quite dirty, like ya say a few more washes and it should be looking better. Got around to gettin ma rear mudflaps lastweek so hopefully get them this week. No more tar marks up the side of my car plus it makes the car look a little more lowered

yeah mate thats right, they look quite cool i think

heres what you need to do kenny, as they gti arch liners and rear valance are not made for the flaps

remove the wheel of the side your fitting the flap too

firstly push the flap in to place and secure by knocking over the black u style clip with a rubber mallet

you then need to get an awl or bradawl and make a small hole in the arch liners where the holes in the flaps are so you can fit the inner arch securing screws

you now need to repeat the hole making on the rear valance underneath the flap and secure it with the screw
fit the wheel and repeat for the other side and then your done

making all the holes sounds bad but you cans see them, i have removed mine to check and its not visible so dont worry

Cheers Jeff. Will fit them on when am off on sunday, weather depending and hangover depending!!

Looking great as always Jeff (and Kenny).

I really need to start cleaning my engine bay. haven't since I've bought mine