UK-POLOS.NET - THE VW Polo Forum

Posted: **Thu Jun 26, 2008 9:18 pm**

Low 6n2s!

coilovers please

and spec

cheers

Posted: **Thu Jun 26, 2008 9:45 pm**

mine is around 120mm on the back and 100mm on the front silly low but great fun! PhilJ coilovers on group buy. people say there are a harsh ride but i enjoy bouncing along so its a big smile on my face! budget coilovers and i found they are very good just watch out for corrosion and seizing!

Posted: **Thu Jun 26, 2008 9:53 pm**

^^ looks sweet, any problems with speed bumps? scrape much? bottom out? found on my old mk3 that with any large cambered road it would bottom out

Posted: **Thu Jun 26, 2008 11:22 pm**

Anyone have a standard silver 6n2 thats decked?
or dropped on springs?

Posted: **Fri Jun 27, 2008 1:57 pm**

Not my picture, but is my car with its bra on:

Posted: **Fri Jun 27, 2008 2:26 pm**

Here's mine. TA Technics Coils and I'd say it was about 100 at the front and 90 at the rear.

Posted: **Fri Jul 04, 2008 7:08 pm**

xcore- you will be suprised i dont scrape i dont bottom out and only when im giving it proper round corners and its very bumpy my driveshaft catches i am very pleased!!!!

Posted: **Fri Jul 04, 2008 9:20 pm**

Here you go

1.4 16v SE

PhilJ Coilovers
Up about 10mm at the back and 30mm at the front.
I scrape like a b***h, yet have no problems with speed bumps

Posted: **Sat Jul 05, 2008 5:28 pm**

Polobear the camber on your fronts is awful!!!

Posted: **Sun Jul 06, 2008 6:36 pm**

that red one looks pimp!

might have to fit a LCR splitter to mine...

does the standard one just pulll off and you screw the new splittera to it and reattach?

cheers

Posted: **Mon Jul 07, 2008 5:07 pm**

Tim_GTi wrote:Polobear the camber on your fronts is awful!!!

Er...yeh kinda on my list of things to do!!!

Posted: **Mon Jul 07, 2008 5:20 pm**

xcore wrote:that red one looks pimp!

might have to fit a LCR splitter to mine... does the standard one just pulll off and you screw the new splittera to it and reattach?

cheers

Thanks lol

Everyone is copying my ideas dammit!

My Cupra R splitter is bolted into the original splitter mate

Posted: **Mon Jul 14, 2008 12:42 pm**

Posted: **Mon Jul 14, 2008 3:50 pm**

xcore wrote:that red one looks pimp!

might have to fit a LCR splitter to mine... does the standard one just pulll off and you screw the new splittera to it and reattach?

cheers

don't forget .. it's Canyon Red

Posted: **Mon Jul 14, 2008 7:41 pm**

Remember flash red is superior gem

UK-POLOS.NET - THE VW Polo Forum

pic request... decked mk5s and bonnet bras!

pic request... decked mk5s and bonnet bras!