Page 1 of 1
K&N cold air feed...
Posted: Tue Jul 15, 2008 3:40 am
by yosin
need some help to stick the cold air feed to the front top grill of the polo mk4 6n...
how did people cut the hole or what they use to cut through the plastic bit to get through to the grille?? or is there other ways.
thanks
Posted: Tue Jul 15, 2008 10:27 pm
by Tim_GTi
Cable ties? Have you also tried the passenger fog grill?
Posted: Thu Jul 17, 2008 3:12 am
by yosin
hey tim, im trying to get it through the plastic bit behind the grill..beacuse theres that plastic bit behind the grill that i need to cut through first in order to cable tie it onto the front grill...so im just wondering what did use to cut through the plastic as its quite solid and thick lol..
ass for passenger fog grill i might resort to that after if i cant cut through it lol..
right now its currently facing downwards at the bottom of the car
Posted: Thu Jul 17, 2008 7:12 pm
by baileysufc
best thign for cuttign plastcs liek taht is a die grinder or a electric version b&Q did tehm for 20 quid wilth loads of bits
at one point
or u cud drill a whole to start of and do it wiht a hacksaw blade
troy
Posted: Thu Jul 17, 2008 10:08 pm
by yosin
o i c...
i just did a little search...is like one of these?
http://www.diy.com/diy/jsp/bq/nav/nav.j ... d=products
thanks
Posted: Fri Jul 18, 2008 6:27 pm
by baileysufc
ye thats one btu u wud need a compressor for it if u do have one the air ones r betetr but
thsi is teh electric one
http://www.diy.com/diy/jsp/bq/nav/nav.j ... earch=true
they didi do a pro one of teh own brand but it not listed on teh sight
troy