Page 1 of 1
Problems with HID's, coming on with full beam!
Posted: Mon Aug 11, 2008 7:07 pm
by lolhoward
I have just noticed that when my lights are off or I just have sidelights on, when I flash my lights (full beam) my main beam HID's come on aswell. I didn't notice this with my normal lights. If they used to I just will stop flashing! as I heard turning HID's on and off can shorten there life span.
Please could somebody confirm or help me out, cheers.
Also one looks slightly brighter, is that just the bulb being slightly different or just the way its reflecting as I haven't got projectors.
Posted: Mon Aug 11, 2008 8:48 pm
by Tim_GTi
Your dipped beams should not be flashing with your full beams no, do they come on when you turn your full beams fully on also?
Posted: Mon Aug 11, 2008 8:54 pm
by lolhoward
Sorry i've confused the matter.
When I flash my headlights, with the stalk my main lights come on also. Sidelights stay off.
So when I flash my H3 (full) my HID's H7 (dipped) come on. Sidelights 501 only on when selected.
Does that clear it up?
Posted: Mon Aug 11, 2008 8:59 pm
by Tim_GTi
Double check your wiring for the HIDs, something's definitely up.
Your full beam bulbs are H1 not H3 by the way.
Posted: Mon Aug 11, 2008 9:02 pm
by lolhoward
sorry, could't totaly remember. But at least you got me!
Any suggestions? The only changes were the HID's. Also listed this in electrical and Alex said that theres not a prob!
Posted: Mon Aug 11, 2008 9:05 pm
by lolhoward
If I put sidelights on, 501, full beams using the stalk can only be used flashing on/off doesnt stay in the fully on pos. When I turn on dipped and I use the stalk it can stay in the fully on pos. Not sur if thats ok or not?
Posted: Mon Aug 11, 2008 11:42 pm
by alexperkins
This is normal tim - its something to do with the low current start on the dipped when you put HIDS in. Mine did this from day one...even with HID mains!
Posted: Tue Aug 12, 2008 4:15 pm
by Tim_GTi
So your dipped beams flash aswell as your fulls Alex?
Posted: Tue Aug 12, 2008 4:23 pm
by alexperkins
Basically ye - it depends which position your high beams are in. This only occurs on retrofit ones tho - HID Mains on the GTI have no effect.
Posted: Tue Aug 12, 2008 4:44 pm
by Tim_GTi
alexperkins wrote:Basically ye - it depends which position your high beams are in. This only occurs on retrofit ones tho - HID Mains on the GTI have no effect.
Ahh was going to say. Mine do not lol
Posted: Tue Aug 12, 2008 6:21 pm
by lolhoward
Yeah, put back my H7 Philips and there the same. Pull stalk half way and just full beams, but all the way until it clicks is both.
Swapped my HID's over, and now both seem to be as bright? Must have been how they were reflecting or something. Where way to high though
. Lowered them down to the right height, i think
