Page 1 of 2
PCDs (now turned into a discussion about rare bbs rims!)
Posted: Wed Mar 03, 2004 12:36 pm
by KarlM
can someone just confirm what PCD the 6n is?
am i right in thinking that its ET35 offset? so some alloys that are
SIZE-6 X 13 ET 13 4X100 STUD PCM.
will stick out quite far?
please replay asap!
Posted: Wed Mar 03, 2004 12:39 pm
by david burton
yes - they will stick out further, but they're only 6 inches wide so that's not so bad. Be careful tho! What width wheels are you running now?
Posted: Wed Mar 03, 2004 12:47 pm
by KarlM
7" ET36
Posted: Wed Mar 03, 2004 1:43 pm
by amstrange1
They'll stick out a fair bit - there's a set of ET13 wheels for sale on Porka at the moment, 13"x6" too. They were fitted to a Mk2 saloon and apparently didn't scrub.
Posted: Wed Mar 03, 2004 1:48 pm
by KarlM
cool,
so if anyone wants to buy some gold 'Mahle' alloys then make me an offer
Posted: Wed Mar 03, 2004 1:50 pm
by david burton
So, you're an inch wider at the mo (so the 6's would stick out a half inch less), but the offset is 22mm further out - so these new ones should stick out about 10mm more.
what do the alloys look like (the ones you're sellin)?
are these em:
Posted: Wed Mar 03, 2004 1:54 pm
by KarlM
Posted: Wed Mar 03, 2004 3:41 pm
by Speedlaw
Could be very, very sweet.
Posted: Wed Mar 03, 2004 3:48 pm
by KarlM
wheel i've ordered some new 17s but was thinking about keeping these for the VW shows.
You would not believe how much i paid for them
Posted: Wed Mar 03, 2004 4:03 pm
by amstrange1
I think the wheels for sale on Porka (okay they're my brothers!) may well be the same. I've been trying to find out what they are for ages, but having seen that pic I've done some more research and it seems like the wheels were fitted to E21 series BMWs. What do yours have stamped on them Karl?
Posted: Wed Mar 03, 2004 4:07 pm
by KarlM
not received them yet. There BBS 'Mahle's
I think they came standard on the E30 M3
Posted: Wed Mar 03, 2004 5:53 pm
by david burton
how much d'you pay?
Posted: Thu Mar 04, 2004 8:50 am
by KarlM
If i told you you'd hate me.
it was less than £100 notes (including shipping)
Posted: Thu Mar 04, 2004 12:25 pm
by amstrange1
@Karl - when you get them can you let me know what's stamped on them please? Would like to know for definate what the wheels my bro has are.
Posted: Thu Mar 04, 2004 4:23 pm
by KarlM
where abouts am i looking? I'll ask the seller. centre cap or rim?
