Page 1 of 1

jetta wheels on a polo?

Posted: Tue Oct 21, 2008 1:15 pm
by anto
i've been offered a set of 15 wheels off ajetta and as far as i know they'll fit as both are 4 x 100,but i just wanted to make sure.if anyone knows for definate i'd be greatful :P

Posted: Tue Oct 21, 2008 8:43 pm
by Tim_GTi
If they're 4X100 then they should be fine. Pretty sure VW all use the same bore when it comes to the same stud numbers.

Posted: Wed Oct 22, 2008 8:39 am
by JarnoVWPolo6N
Tim_GTi wrote:If they're 4X100 then they should be fine. Pretty sure VW all use the same bore when it comes to the same stud numbers.
Nope, there's 4x100, adn 4x130 used by VW, also 5x100, 5x130 and 5x112 is/was used, some of them are rare, but should be taken into mind when looking for other VW wheels, just get them 4x100, or use adapters to fit them

Posted: Wed Oct 22, 2008 8:42 am
by alexperkins
Hes reffering to the center bore Jarno being 57.1mm not the stud pattern :P

Posted: Wed Oct 22, 2008 8:43 am
by JarnoVWPolo6N
alexperkins wrote:Hes reffering to the center bore Jarno being 57.1mm not the stud pattern :P
Whoops :oops: little case of misreading in the morning there, my bad, and yes, indeed do all watercooled VW's use the same centre-bore of 57,1mm

Posted: Wed Oct 22, 2008 8:44 am
by alexperkins
I love misreading in the morning :D