Page 1 of 1
5 stud conversion
Posted: Wed Nov 12, 2008 2:39 am
by _dubstar
I have a 1997 polo and want to convert it from 4x100 to 5x100 the rear is ok as gonna use mk3 rear discs but how do i do the front ? Has anyone done this ?
Posted: Wed Nov 12, 2008 4:24 pm
by Tim_GTi
Are you not one for adaptors?
Posted: Wed Nov 12, 2008 8:31 pm
by _dubstar
Well adaptors space out to much.
Posted: Wed Nov 12, 2008 10:18 pm
by Tim_GTi
15mm?
Posted: Wed Nov 12, 2008 10:33 pm
by bbspolo
late mk3 golf hubs can be adpted 2 fit well! i did a set on my first 6n polo!
Posted: Wed Nov 12, 2008 10:43 pm
by _dubstar
Tim_GTi
15mm?
If you got 35mm off set 15's on polo now and 5x100 35mm offset to go on even 15mm will make the wheels 20mm pushing them out miles.
late mk3 golf hubs can be adpted 2 fit well! i did a set on my first 6n polo!
How and what did you do ? Pm me a number and will call if easier.
Posted: Thu Nov 13, 2008 1:02 am
by bbspolo
go get one from the scrappy and then put it beside a polo one and u will see what needs 2 be done its not that hard!
from what i rember u need 2 weld a small patch on one side then grind the parts the shock goes though a bit 2 enlarge it 2 fit!