Page 1 of 1
Wellers! Fitment?
Posted: Thu Nov 13, 2008 6:55 pm
by vw-po-low
If all fails, i'll buy some wellers and keep the cups. I can only find
Size: 7.0 x 13 | Stud Spacing: 4 Stud x 108.00mm (4.25 inches)
2nd Stud Spacing: None | Back Depth: 100mm
Correct firment. i knmow that my dub is 4x100..
do they do 4x100's? or do i need wobble bolts
Posted: Thu Nov 13, 2008 7:01 pm
by Tim_GTi
You want either these:
7 wide
http://www.wellerwheels.co.uk/catalog/1 ... 34336.html
or these:
8 wide
http://www.wellerwheels.co.uk/catalog/1 ... 65367.html
No wobbly bolts needed, although the centre bores are 65mm, so you'd need spigot rings.
Posted: Thu Nov 13, 2008 7:25 pm
by vw-po-low
Tim, Your a star, ha.
Hmm what tyres you think with a little stretch, 175/50/13?
Posted: Thu Nov 13, 2008 8:09 pm
by Tim_GTi
Yeh mate, 175/50
Posted: Fri Nov 14, 2008 2:29 pm
by vw-po-low
You know of anywhere else i can buy Wellers? Apart from the site. Out of stock
Posted: Fri Nov 14, 2008 2:38 pm
by Tim_GTi
I don't sorry mate, keep, an eye out on forums, and give weller a ring to see when they're expected back in! they may just have not updated their site, you never know
Posted: Fri Nov 14, 2008 2:47 pm
by vw-po-low
Tim_GTi wrote:I don't sorry mate, keep, an eye out on forums, and give weller a ring to see when they're expected back in! they may just have not updated their site, you never know
Cheers Tim!
I believe Wellers shop/place is only in Tamworth not that far from me.