Page 1 of 1
head swaps
Posted: Thu Dec 11, 2008 6:21 pm
by gaz2000
ive got the 1.6 8v aee engine and wondered if there are any 16v heads off other models that fit?am planning on bigger valves and a high lift cam as things are but a 16valve head would be great.any ideas?
Posted: Thu Dec 11, 2008 6:27 pm
by vw-po-low
Think you'll find you'll have to have a 16v conversion, you cant just stick the 16v head on.
Posted: Fri Dec 12, 2008 11:17 am
by NOZ
^^ What he said lol
Just do a 16v conversion and if you want in the future you can get a 6n2 GTI bottom end which'll give you a 1.6 16v!
Posted: Fri Dec 12, 2008 6:49 pm
by gaz2000
cheers,now i know lol.my current plan is to fit the aee with an uprated air filter,cat back exhaust,cat blank,raceland manifold and futher down the road a shrick cam and ported and polished head with bigger valves,how much gain would i be looking at?a remap will be done also
Posted: Sat Dec 13, 2008 5:51 pm
by NOZ
Instead of spendign all the money on the mods for an AEE, you might as well get a 1.4 16v lump which will be the same horsepower(ish). Its better to mod the internals of a bigger engine as a base for reliability.
Also I don't no the bhp on an AEE but suppose its 75bhp. With the mods let say you have another 40bhp, which equals to 115bhp.
With a 16v engine you start at 100bhp and with the same increase in power it results to 140bhp!