Page 1 of 1
Double Din Installation help
Posted: Mon Dec 15, 2008 5:10 pm
by wburton
Hey, i've purchased a Double Din DVD monitor for my polo, and been trying to work out what i will need to install it, ive had a look at some other threads but still condused! Would really appreciate it if someone could just help me out on what i will need for it to fit and work properly.
Thanks guys
Posted: Mon Dec 15, 2008 5:22 pm
by ryandel_9n3
how new is it?mines is and 08 plate
i had to get an iso adapter and then a adapter for the arial.
hope this helps
Posted: Mon Dec 15, 2008 6:45 pm
by wburton
thanks alot, its an 07 reg. so other than those two bits would i not need a cage or fascia adapter atall? also where did you get the two parts you mentioned from? thanks very much
Posted: Mon Dec 15, 2008 6:55 pm
by ryandel_9n3
did your new one not come with cage?
got them from halfords man.
whats the iso connecters like from your car?is it two bits or just the one big one?
Posted: Mon Dec 15, 2008 6:56 pm
by GTi_dan
This is basically what i used to convert my VW wiring to standard ISO...
http://www.bluespot.co.uk/install/show_model.asp?id=297
(see item ref - 7607621175) 20quid.
Posted: Tue Dec 16, 2008 3:04 pm
by wburton
Ok, thanks alot guys, looks like i'll need an iso and aerial adapter. Waiting for the headunit to come through so not sure what it comes with but will ring store and check. How about the fascia adapter to go around the unit? where could i get one of them from?