UK-POLOS.NET - THE VW Polo Forum

anyone recomend a specific size to fit 16s to my 9n?

been told that it should be 195/45/16 but was wondering if it looked better on
195/40/16 or on something wider like 205/45/16.

any help would be great!

Depending on the width, but anything up to 7.5j wide go with 195/40/16 mate.

oh sorry forgot bout that. they are bbs rxiis so i think thats 7"

yep, 195/40/16 will be perfect.

coolios, any place u recommend that i can pick a set up for not too much? found some toyos for 60 each

captainbeyond88 wrote:coolios, any place u recommend that i can pick a set up for not too much? found some toyos for 60 each

Check out blackcircles.co.uk and mytyres.co.uk mate.

Dont 9ns have a different rolling radius tim? I think its a 45 on a 16 on there not a 40

My bad, Yeh the correct profile for 9N would be 195/40. But if your going low 40s would look better

awesome thanks folks, yeah its being slammed to the ground as soon as i have a chance to fit the coilovers

captainbeyond88 wrote:awesome thanks folks, yeah its being slammed to the ground as soon as i have a chance to fit the coilovers

I'd get the 40s then mate

captainbeyond88 wrote:anyone recomend a specific size to fit 16s to my 9n?

been told that it should be 195/45/16 but was wondering if it looked better on
195/40/16 or on something wider like 205/45/16.

any help would be great!

205/45*16 are the std for the gti which runs 16 inch alloys as for 40 series abit bumpy but it is your choice personally I would stick to 45