Fitting HOneycomb Lower Grilles
Posted: Thu Feb 05, 2009 4:58 pm
Got my Lower Grilles today, going to attempt to fit them tomarrow, is there a guide on here or anyone got any tips to help me out?
cheers j
cheers j
drivers side one is screwed in originally, undo ther screw and it just pulls out
the passenger side one has the temp sensor in it, so push that out first, and a good tug pulls that one clean out, it will take force, but just a quick snapy movenent straight and forwards does it
centre one is the same as the passengers, just clipped in, its a 2 hands job, but again pulls straight out with a bit of force, i eased 1 corner out at the top first then worked my way round 1 by 1 till it was free
refitting, juts make sure you get all the lugs back in the clips, i.e line them back up properly and it clips in fith a firm clip sound at each lug point
hope that helps