Page 1 of 1

Seats

Posted: Wed Feb 18, 2009 10:53 pm
by jezza
What type of seats can you fit to 6N's?

Re: Seats

Posted: Wed Feb 18, 2009 11:14 pm
by jezza

Re: Seats

Posted: Wed Feb 18, 2009 11:46 pm
by kyle1b1
fake leather is just NO for me tbh

Re: Seats

Posted: Thu Feb 19, 2009 12:44 am
by Tim_GTi
For a full set:
6N2,
Ibiza 3
Golf 3

Anything will go in the front though within reason, you just need custom subframes fabricated. There's more measurements to consider with the rears, so it's a bit more of a narrower choice.

Re: Seats

Posted: Sat Feb 21, 2009 8:35 pm
by jezza

Re: Seats

Posted: Mon Feb 23, 2009 12:22 am
by Tim_GTi
The fronts should be fine with some custom subframes, for the rears see if you can get some measurements off him?

Re: Seats

Posted: Tue Mar 03, 2009 12:03 pm
by jezza
Tim_GTi wrote:For a full set:
6N2,
Ibiza 3
Golf 3

Anything will go in the front though within reason, you just need custom subframes fabricated. There's more measurements to consider with the rears, so it's a bit more of a narrower choice.
Anybody know of where i might be able to get hold of these or know anyone selling any?

Re: Seats

Posted: Tue Mar 03, 2009 8:05 pm
by Tim_GTi
Seats? Check the editiom38 forums, always interior on there.

Re: Seats

Posted: Fri Mar 20, 2009 5:17 pm
by tass
I'm pretty tall and the original 6n seats are doing my back in! Any recomendations on seats with lumbar support or bucket type seats that are gonna offer more support? Straight swap ideal! Cheers lads!

Re: Seats

Posted: Sat Mar 21, 2009 7:21 pm
by Torq-Al
tass wrote:I'm pretty tall and the original 6n seats are doing my back in! Any recomendations on seats with lumbar support or bucket type seats that are gonna offer more support? Straight swap ideal! Cheers lads!
mk3 Golf GTI Recaro's or an Ibiza of similar age will be a straight swap. Fronts drop straight onto original runners, its the rear bench that requires modification, so you'll be ok if you just put the front chairs in for driving comfort!! :D

Here's the link to the DIY guide: http://www.uk-polos.net/view ... 10&t=42268

Re: Seats

Posted: Sun Mar 22, 2009 12:15 am
by Dan 6N
Just fitted 6n2 seats into mine. They look a lot better and are more comfortable too :)