Page 1 of 1
I've got 17s!!!!!
Posted: Wed Mar 17, 2004 10:10 pm
by VwPo1o
Well, I knew the time would come, and it has; i have finally got some bling bling 17s on ma polo!!! Got three on today, and fourth one goes on tomorrow when it comes in the morning. As you can tell i'm pretty excited!!! Little problem with the front wheel tho, there's a bump well under the arches, almost where the mudflaps would go. the wheels scrub against it slightly just before full lock. Should i file it down???? I think i probably could. Anybody had the same problems???
P.S. Pictures coming soon on this thread. Never done this before, so how do i put the pictures on?
Posted: Thu Mar 18, 2004 4:28 pm
by polopowah
file it down, jobs a good'un
17's are rather large for the wee polo
have u had it lowered at all??
heres how i post my pics
first upload the file,
i personally use
www.imageshack.us, extremely reliable pic hosting
find your pics on pc, make sure they aint mahoosive! like jon did, tee-hee
then click upload
then after its done it will give u a url to post on forums
sumthing like this [img]imageshack.us/mypolo2[/img] at a guess
copy n paste into your message body
done!
look forward to seeing it
-Ben0
Posted: Thu Mar 18, 2004 10:38 pm
by VwPo1o
Thanx a lot mate, i'll be doing that soon.
Posted: Thu Mar 18, 2004 10:46 pm
by VwPo1o
Yeah i have lowered it. It's lowered 45mm on eibach springs
Posted: Fri Mar 19, 2004 6:52 pm
by polo2k
just so you know those "lumps" that you refer to which are actually the ends of the sills, are also the reference points if the car ever needs to straightened after a smash. this is all iirc of cource
ps if they are the sill ends then they will be over a milimeter thich so youll have a lot of filing to do
Posted: Fri Mar 19, 2004 11:43 pm
by VwPo1o
I managed to cut as much of the inside mudflaps as i could, it really has made so much of a difference. I'm getting the arches rolled next weekend, but i'm not really sure where to go. With respect to that lump, well i gues i'm just gona have file and file and file......
Posted: Sat Mar 20, 2004 10:22 am
by KarlM
where abouts are you?
Posted: Sun Mar 21, 2004 11:04 pm
by VwPo1o
I'm from north london.
Posted: Mon Mar 22, 2004 11:42 am
by Johnmk4
Type K Stying in South West London wud do it
www.typekstyling.com
they are sorting a few bits on my polo, the owner is a top bloke!
Posted: Mon Mar 22, 2004 7:34 pm
by VwPo1o
There's another one as well, style dynamax or something like that. Heard good things about them. Anybody know anything about them? What's the website address?
Posted: Tue Mar 23, 2004 8:22 pm
by VwPo1o
Polo2k, will it be bad if i do file it down.
Posted: Wed Mar 24, 2004 10:25 am
by polo2k
id have a good check as to whats behind the "lumps" as they may be the extremities of the sills which are verry important to the ridgidity of the car so id find out form vw how far allong (towards the front of the car they are nessary)and then act on that
Posted: Wed Mar 24, 2004 10:30 pm
by VwPo1o
It clears but only just. Sometime later i'll get 195/40/17 tyres for the front and then get 3mm spacers, it'll give it much more clearance then. Would it be good to have 195's at the front and 205's at the back, or should i have the same all round. Thanx polo2k for the advice.
P.S. went to the vw dealer and they said esactly what you said. He also said that it probably had a thin sheet of metal surrounding it, so filing it down would effectively get rid of the sheet, not good!!!!!
Posted: Thu Mar 25, 2004 10:20 am
by pettsy
VwPo1o wrote:There's another one as well, style dynamax or something like that. Heard good things about them. Anybody know anything about them? What's the website address?
im guessing its these...
http://www.styledynamix.co.uk/