Page 1 of 1

lowering 30mm

Posted: Thu Mar 18, 2004 7:56 pm
by noodlez_polo
im lowering my olo!, "affectionnate name i didnt miss spell it" , 30mm on wednesday and having the wheel bearing done at the same time, whats the general opinion on the fact that im only uprating the springs and using the original shocks and dampers? is the ride going to be seriously annoying or just noticeable :?:

Posted: Thu Mar 18, 2004 8:35 pm
by david burton
It should be ok, but not wonderful - I did it on my 1 litre and was very happy with it. Remember to do the tracking straight away - lowering the car will make the handling appauling if you don't do the tracking too.