UK-POLOS.NET - THE VW Polo Forum

I am going to buy some smoked rear lights for my 6n. they say they fit straight on, but how do i go about this, and is it fairly simple?

thanks.

if theyre the same as teh mk5 which i believe they are, u unplug them at he back and undo the 3 bolts to take each light cluster out then put the new one in, do up the 3 nuts andplug in. then check the bulbs all work. also depends wat rear lights ur getting.

Spray is cheaper and just as good in my opinion

If you have the normal rear lights you're better off spraying them red or black. Just as effective. If not you could get a set of 16v rears (although not tinted enough) which would be cheaper then aftermarket lights.

thanks, i am now thinking of getting some mk5 rear lights, but will they need adapting much?

Yeah a tad. There is some instructions on here somewhere.

Here's the DIY guide to modify the 6n2 lights to fit a 6n.

http://www.uk-polos.net/view ... =10&t=9117

Al beat me to it.

Very simple to do!

Good luck!

i got the blacked out lights, there sweet

^^ Black out 6n2 lights would've been sweet lol

and probably cheaper, haha

but they are not blacked out enough for me.