UK-POLOS.NET - THE VW Polo Forum

were could i get longer wheel bolts guys????
any help would be great

http://cgi.ebay.co.uk/20-x-Alloy-Wheel- ... dZViewItem

seen these on the bay

need about 30-35mm bolts for the polo as soon as possiable.
any help would be great.
cheers ryan

Hey mate!

I can get you some 40mm (thread length) if this helps??

think the 40mm is to long.cheers tho

any also know what the thread size is on the polos??
e.g #
Thread - 14x1.50mm??????????????
#
Thread Length - 26mm-this i need longer about 30/35mm
#
Head Size - 17mm

it depends what your car is?

Gti's are M14

Some of the other models are M12 thread. You sure 40mm wont be ok??

i had ones that were 40mm or just over and i couldnt even move the car cause they had went all the way throw.
i have 6mm spacers on the front soo 35mm would be perfect

ok mate....you will struggle to find that size.....it usually goes 30mm 40mm 50mm 60mm.

I Also have 60mm in stock....have you ever thought about chopping them down? I know people that have done this to get the desired length with a cutter.

Maybe an option.

found a place that does 35mm ones but dont know wat the thread is on my polo!!!!
ARGGGGG!!!!!!

what is the exact model, engine, year spec of your car?
tell me this and i can find out 100% for you tommorrow.

its an 08 plate 1.2 3cylinder this think its the 60bhp haha

In that case then.... it is deffo 14 x 1.5 thread.

cheers dude!!!