Page 1 of 1
Wishbones
Posted: Tue Apr 07, 2009 9:22 pm
by jezza
Replacing mine tomorrow and was just wondering if anyone has any tips?
Re: Wishbones
Posted: Tue Apr 07, 2009 9:55 pm
by randomage
not too hard a swap, although if its the drivers side, you may want to find a way of lifting the sump up, as it fouls the innermost bolt holding on the wishbone. Other than that, straight swap, no complex bits as far as i can remember!
Re: Wishbones
Posted: Tue Apr 07, 2009 10:49 pm
by jezza
Didnt think it was to difficult, in the haynes manual it says, delay the tightening of the pivot bolts until the weight of ther car is on the wheels, how will i do this when my car is lowered? lol.
Re: Wishbones
Posted: Tue Apr 07, 2009 11:20 pm
by randomage
I dont think Hayne's thought of that! you'll have to find some way to get around the wheel, i didn't have that problem as my car is still in stilt mode lol!