Page 1 of 1
Alloy/Tyre question
Posted: Thu Apr 09, 2009 7:33 pm
by DF:FD
Ino this is going to sound really stupid...but how much air should be put into a tyre of a 195/45 16" i put about 32 35(on the air gauge) but the they loook low still i want to put the right amount am i not putting enough??
Re: Alloy/Tyre question
Posted: Thu Apr 09, 2009 10:07 pm
by charlievwp
Tyre pressures should be noted inside your fuel cap matie
Re: Alloy/Tyre question
Posted: Thu Apr 09, 2009 10:31 pm
by KennyPOLO_Gti
As Charlie says its on the cap, i have mine at 32 all round usually. But if you have that and it still looks flat then maybe the gauge is fooked??? Try another one and see mate??
Re: Alloy/Tyre question
Posted: Thu Apr 09, 2009 10:44 pm
by Tim_GTi
Could be the gauge, could be a dodgy tyre. Could be the nature of the tyre, what brand are they?
I get the same mind on my 165/50s, 32 psi looks well low.