Page 1 of 1
wheel question
Posted: Fri Apr 17, 2009 10:55 am
by dickiemint
I've been offered some alloys for my R reg 1.4 cl polo, they are from a S reg Renault Megane Coupe.
Can any one tell me if they will fit the polo OK?
The tyre size on the alloys is 175-65-R14.
Many thanks in advance, R.
Re: wheel question
Posted: Fri Apr 17, 2009 11:18 am
by jezza
Depends if the PCD is 4x100? And i think the ET is 38.
Re: wheel question
Posted: Fri Apr 17, 2009 11:32 am
by NOZ
^^ Same as above really. The
recommended offset for polo's is 35-38.
You'll have to find the alloys spec or you wouldn't know really. if the PCD is different there is a slight chance of using wobbly bolts or adaptors to make them fit; all depends on the alloys at the end of the day!
Re: wheel question
Posted: Sun Apr 19, 2009 2:14 pm
by vw-po-low
I'm aware some Renaults run 4x100, but not all.
As said you'll need the PCD and ET.
ET never plays a factor for me but some people like to keep it correct for that vehicle.