Page 1 of 1
6n2 coilovers help needed
Posted: Mon Apr 27, 2009 9:59 pm
by ALI6n2
hi im new on here and looking to lower my car. I've decided 30mm drop would be best as there are many speed bumps around my area, what would you reccomend?? i would actually prefer 40mm but not sure how i'd cope (i.e. scraping on bumpy roads and general ride) Pics would be good!
Also if anyone knows anywhere that does them reasonably price id be greatful if you could let me know
thanks
Re: 6n2 coilovers help needed
Posted: Mon Apr 27, 2009 10:01 pm
by ALI6n2
Also forgot to mention, springs! Do they do the same job because i heard the ride isn't as good as coilovers. i.e its much stiffer?
Re: 6n2 coilovers help needed
Posted: Tue Apr 28, 2009 5:42 pm
by Tim_GTi
I'm down about 75mm on my pepperpots, and I don't get that many issues with bumps. I've just got to take it slow.
visually you'll hardly notice a 30mm drop on a 6n2, they're incredibly high to start with. I'd take it down at elast 60mm.
Springs just replace your stock springs, but use the original shocks. The standard shocks can't take any more than around 40mm though.
Re: 6n2 coilovers help needed
Posted: Tue Apr 28, 2009 9:51 pm
by ALI6n2
In that case am i better going for coilovers then.. what have you got in yours?
I've seen these on ebay not sure though
http://cgi.ebay.co.uk/HighQuality-Coilo ... 18Q2el1247
Re: 6n2 coilovers help needed
Posted: Thu Apr 30, 2009 11:16 pm
by Tim_GTi
I've got TA Technix coilovers. Pretty much the same as the one you've posted there