Pedal Box Problem
Posted: Thu May 14, 2009 10:03 am
Ok so over the past few weeks ive been having problems with my clutch. At first i thought the self-adjuster wasnt working so got the 10 and 13 out and tightened the clutch cable. This was to no avail as the problem soon came back. Earlier this week i bought a new clutch cable from my local motorshop for £30 and fitted it. All seemed good but a yesturday at my mates house i pushed the clutch down to reverse out of his drive but seemed to just snap under my foot and went completley limp.
After taking out some of the trim and the pedal itself (pedal was fine) me and my mate took the pedal box out and instantly new what had happened. I'm sure most of u guys are aware of this problem but if your not, basically the welding on the pedal box was very poor on most VW around year 2000. It was inevitable they would snap at some time and VW got so many complaints there was a recall on the Polo GTi's.
Now after some research i found the official recall on the Vosa website
http://www.vosa.gov.uk/vosa/apps/recall ... nk&tx=VOSA
I have a 1999 1.4 16v but all the pedal box's are the same so i have printed this out and will take it to my local VW dealer and see what thay can do.
Hope this helps, i will get some pics up soon of where u need to look and what the f****d pedal box and poor welds look like
After taking out some of the trim and the pedal itself (pedal was fine) me and my mate took the pedal box out and instantly new what had happened. I'm sure most of u guys are aware of this problem but if your not, basically the welding on the pedal box was very poor on most VW around year 2000. It was inevitable they would snap at some time and VW got so many complaints there was a recall on the Polo GTi's.
Now after some research i found the official recall on the Vosa website
http://www.vosa.gov.uk/vosa/apps/recall ... nk&tx=VOSA
I have a 1999 1.4 16v but all the pedal box's are the same so i have printed this out and will take it to my local VW dealer and see what thay can do.
Hope this helps, i will get some pics up soon of where u need to look and what the f****d pedal box and poor welds look like