Page 1 of 1
Protection Light
Posted: Sat Jun 06, 2009 9:37 pm
by stuart1903
Installed my subs, amp and 6x9s finally after a bit of a wait after a small accident... ran them until wednesday till they didn't work on the way home from work and the protection light is on. Fiddled about with the cables and the ground cable seems to be the problem. regrounded it and changed the ring terminal but its still not working. Any ideas.
Re: Protection Light
Posted: Sun Jun 07, 2009 11:14 am
by Tim_GTi
what protection light? on your amp?
Checked all the fuses?
Re: Protection Light
Posted: Sun Jun 07, 2009 1:17 pm
by stuart1903
Yep. Works sometimes when I move about the ground cable but not for very long.
Re: Protection Light
Posted: Sun Jun 07, 2009 6:09 pm
by Tim_GTi
sounds like a bad ground to start with. where it is located to and how it is secured?
Re: Protection Light
Posted: Mon Jun 08, 2009 4:57 pm
by stuart1903
Tim_GTi wrote:sounds like a bad ground to start with. where it is located to and how it is secured?
Secured onto the screw which holds the black plastic trim next to the parcel shelf on, been sanded down to the bare metal and attached with a ring terminal which I've changed. Checked all the attachments to the amp so any more ideas.
Re: Protection Light
Posted: Mon Jun 08, 2009 8:38 pm
by Tim_GTi
could be the amp throwing up a fuss. have you got another one you could test in it's place to rule out the wiring? or a mates perhaps?
Re: Protection Light
Posted: Mon Jun 08, 2009 11:13 pm
by stuart1903
Tim_GTi wrote:could be the amp throwing up a fuss. have you got another one you could test in it's place to rule out the wiring? or a mates perhaps?
Another AMP you mean? Not really no.
Re: Protection Light
Posted: Fri Jun 12, 2009 7:43 am
by alexperkins
Try grounding it on the factory ground point behind the passenger side shelf at the back. Its a proper mount too, and should be pukka if its a grounding issue.