BMC CDA + Breathers + Engine Cover etc etc
Posted: Tue Jul 14, 2009 4:45 pm
I am selling my induction kit as my partner may start using my car. It was fitted in January this year. I only use the car at weekends so it has only covered approx 2000-3000 miles if that.
The BMC is mint condition and well looked after. It comes boxed with original hose, clamps, stickers, bracket etc. Everything you would get if buying new. I also have a 1.5m length of silicon hose wrapped in rubber which I used as the cold air feed. Or I have 3/4 400-600 mm lengths. I will also supply the slicicone hoses 90 degrees bend and I have a reducer also, if req. I will also supply a breather filter and the one way valve cut out of the air box to save you cutting into yours. Can also supply my cut airbox so you can fit a BMC with the cover still fitted.
So to summerise I have - BMC CDA boxed with all accessories
- 1.5m silicone cold air feed (or 400-600mm lengths)
- Breather filter
- One way breather filter
- 90 degrees bend
- Reducer (if req as I didnt use it)
- Cut air box
This is all you will require to fit the BMC, nothing else needed. The BMC CDA is one of the best induction kits around and is enclosed and made of carbon fibre to keep heat out. I loved having it in. It makes a great noise and improved responsiveness.
Depending on what you choose to have depends on the cost. Would really want to sell with Air box and breathers as one package. Please PM with any offers. Will post or collection/meet possible.
Also check my thread out for more pics: http://www.uk-polos.net/view ... 13&t=38619
The BMC is mint condition and well looked after. It comes boxed with original hose, clamps, stickers, bracket etc. Everything you would get if buying new. I also have a 1.5m length of silicon hose wrapped in rubber which I used as the cold air feed. Or I have 3/4 400-600 mm lengths. I will also supply the slicicone hoses 90 degrees bend and I have a reducer also, if req. I will also supply a breather filter and the one way valve cut out of the air box to save you cutting into yours. Can also supply my cut airbox so you can fit a BMC with the cover still fitted.
So to summerise I have - BMC CDA boxed with all accessories
- 1.5m silicone cold air feed (or 400-600mm lengths)
- Breather filter
- One way breather filter
- 90 degrees bend
- Reducer (if req as I didnt use it)
- Cut air box
This is all you will require to fit the BMC, nothing else needed. The BMC CDA is one of the best induction kits around and is enclosed and made of carbon fibre to keep heat out. I loved having it in. It makes a great noise and improved responsiveness.
Depending on what you choose to have depends on the cost. Would really want to sell with Air box and breathers as one package. Please PM with any offers. Will post or collection/meet possible.
Also check my thread out for more pics: http://www.uk-polos.net/view ... 13&t=38619
