Page 1 of 1
4 stud to 5 stud adapters?`
Posted: Fri Apr 02, 2004 10:05 pm
by SiDaBa
Does anyone know where i can get hold of 4 to 5 stud adapters also with some information on them? can you still get 5 stud with 100 spacing if the 4 stud is already 100 spacing? Also how much do they cost?
thank you!!
Posted: Sat Apr 03, 2004 3:15 pm
by Speedlaw
I know someone that ran 5x100 wheels on his 4x100 car, so yes it can be done using adapters. Don't know who sells these, he had them custom made. It's worth investigating if you can get these from a steel mill.
Posted: Sat Apr 03, 2004 7:46 pm
by pettsy
im not sure myself. the best place to ask would be on the club gti forum, as there a quite a few people running porsche wheels which require adapters etc
http://www.clubgti.com/forum
Posted: Sat Apr 03, 2004 8:43 pm
by SiDaBa
thanks guys!!
Posted: Sun Apr 04, 2004 1:23 pm
by polo2k
if you use the same PCD then 2 of the studs will overlap and id be worried about strength then