6n2 GTi CV Joints
Posted: Sat Jul 18, 2009 1:53 pm
Hey guys,
Think it's time do do a cv replacement on the GTi. There is an awfull clunking noise that I get on accelerating and a bit of a vibration to go with it. It clunks on every rotation under load but it isn't there when the car is jacked up. However there is a bit of play on the inner CV when I have a tug on the drivers side driveshaft so I figured that isn't too good.
Anyway, I've looked on GSF for the cv joints and they don't list the GTi. Will the 1.6 100hp '95> versions still do the job ok? Or are they different?
Cheers for any help you can give.
Jon
Think it's time do do a cv replacement on the GTi. There is an awfull clunking noise that I get on accelerating and a bit of a vibration to go with it. It clunks on every rotation under load but it isn't there when the car is jacked up. However there is a bit of play on the inner CV when I have a tug on the drivers side driveshaft so I figured that isn't too good.
Anyway, I've looked on GSF for the cv joints and they don't list the GTi. Will the 1.6 100hp '95> versions still do the job ok? Or are they different?
Cheers for any help you can give.
Jon