Page 1 of 1
Lowering Spring Question
Posted: Sat Aug 29, 2009 10:03 am
by Jay_6n2
Hi Guys,
I have a 6n2 1.4 16v (75bhp)
Have been offered two sets of Weitec 40mm springs...
1 set from a 1.4 8v 60bhp
1 set from a 1.6 Gti
Will either set fit? and would the gti ones be lower as the car is lower as standard?
If someone could help ide appreciate it.
Jay
Re: Lowering Spring Question
Posted: Sat Aug 29, 2009 12:10 pm
by Bepe
Anyone will fit, there the same chassis. standard the GTi is 15mm lower, but wont be ontop of the 40mm weitec springs
Re: Lowering Spring Question
Posted: Sat Aug 29, 2009 12:22 pm
by red6n2
if you get springs i guarentee 6 months down the line you get coilovers... 40mm on a 6n2 is nothing... yo saw mine and i reckon thats about 100mm plus... and theres still room for more drop !
springs would just be a wate of time and money.
Re: Lowering Spring Question
Posted: Sat Aug 29, 2009 9:08 pm
by Jay_6n2
i know what your saying but ill prob be giving it to the mrs shortly as i am due some money and it might have to be golf gti time
Re: Lowering Spring Question
Posted: Wed Sep 09, 2009 12:27 pm
by Tim_GTi
I'd at least go 60mm
Re: Lowering Spring Question
Posted: Sat Sep 26, 2009 12:41 am
by TurboRix
40mm on a polo isn't much. Either of them springs will go on. Fitting the springs is a piece of p*** as well. You need any help let us know I can guide you through it bud.