wheel adaptors for polo 9n3 ?
Posted: Mon Sep 14, 2009 7:34 pm
i wanto to fit 17" porsche wheels to my polo and know i need 5x100 - 5x130 adaptors but what mm do i need (15mm/20mm/25mm) ? wheels are 17x 7 Et55
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://www.uk-polos.net/
wheel adaptors for polo 9n3 ?
Page 1 of 1
Re: wheel adaptors for polo 9n3 ?
Posted: Mon Sep 14, 2009 9:29 pm
i would say 25 mm at the front and 30mm at the rear, give it a nice staggered setup then
Re: wheel adaptors for polo 9n3 ?
Posted: Mon Sep 14, 2009 11:05 pm
Just to make sure if the wheels are Et55 and i use a 20mm adaptor wheel becomes Et35 and so on, Et55 15mm adaptors becomes Et40?
Re: wheel adaptors for polo 9n3 ?
Posted: Tue Sep 15, 2009 10:45 pm
Yeh thats correc about the offsets.
I had 17x8 rh turbos on my gti running an offset of et35 and it was perfect, got a tiny scuff fromt the front but nothing major. So with a 17x7 it will be fine. Ive got 16x7 d90's on at the moment with and et27, i think, and there is heaps of room.
I had 17x8 rh turbos on my gti running an offset of et35 and it was perfect, got a tiny scuff fromt the front but nothing major. So with a 17x7 it will be fine. Ive got 16x7 d90's on at the moment with and et27, i think, and there is heaps of room.