UK-POLOS.NET - THE VW Polo Forum

wrong section mate, should be under MKV we're the 6n's awre 'ere

im sure someone will re direct you

but to sorta answer ur question i imagine it wouldnt rub on flat roads, ie not many potholes, but you know wat the streets are like.
as the 6n2 have very slightly bigger arches i think it should be fine, ur MKV buddies will confirm though hopefully.

John

Your alloys shouldn't rub with the arches on 30mm. 30mm isn't even low on polo. You should be fine with a 40 profile. Just make sure the ofsets on the alloys are correct. Good luck with your plans bud.

hello, having thoughts about what wheels to get on my new polo.

if i put 16" alloys on my 6n2 polo with tyres 195x40 and then lower it 30mm and have 2adults in the back of the car will it rub?

if anyone has photos of polo 6n2s with 16" alloys and lowerd could they post them as a reply to this please!?

this is the wheels i want: http://www.alloywheels.com/product.asp? ... rchSize=16"

Thanks!

Yeh those wheels shouldn't scrub that much.

Here's what it would look like:

i love that photo haha but yes, the 16"s fit perfectly on the 40-45mm drop I have on mine - never scrubbed once!

where can i get a reasonable priced set of the polo gti 16" wheels from?

is it not 15" that the gti came with?

It did come with 15" BBS RX2s, the 16s were an option on select golf mk3 and early mk4 cabriolets, and I managed to get my hands on a set.

They pop up on the forum from time to time, and ebay is sometimes a goodun, but they are very rare these days!

There's your answer above as some one kindly posted a picture you can see there is a lot of clearance so you don't have much to worry about.

Good luck with the drop mate. Hope it goes well for you. If you don't know how to do the springs pm me I'll write you a quick guide.

thanks for all the help guys !

looking into getting some borbet a's!

not sure what wheels to bus so if you could leave suggestions!
im looking to spend £500ish as i spent ALOT on the car and its standard.

leave photos

Jordy-6n2 wrote:thanks for all the help guys !

looking into getting some borbet a's!

not sure what wheels to bus so if you could leave suggestions!
im looking to spend £500ish as i spent ALOT on the car and its standard.

leave photos

Personally I think the borbet As wouldn't look all that on there. Reason being borbet As only look good when they have a big dish. I.e 9J gives them a decent dish. The 7.5j doesn't have much dish so it just looks like ugly 5 spokes. Lets face it Borbet As are ugly alloys we only buy them because of the deep dish. That's when they look good apart from that in my opinion I think they are pretty much crap.

I'd suggest you go for some BBS or image split rims. They look nice. The image one's will most probably cost you more than 5 ton but they look awesome. A friend of mine has them on his VR6 they are stunning alloys. How ever if you live in area with crap roads they tend to buckle on the inside if the profile is too low.

Any more info needed just ask mate. More than happy to help.

I copied this from one of my replies a while ago.

Most are 15" though, and all are pretty standard scene wheels.

Ronal Turbos


G60 steelies


Black G60 steelies


WRD mesh


BBS RMs


16" BBS RXs


G60 steelies with plain centre caps


ATS cups


BBS RM's with black centres


RH Cups


Ronal LSs (with BBS centre caps)


BBS RXIIs with black centres


Borbet As with black centres


Schmidt TH line


16" Porsche D90s


TH Monos


Audi Peppepots

Thank you so much!

thats a good help