Page 1 of 1
Member Feedback!
Posted: Thu Oct 15, 2009 1:24 pm
by 5509433
I recently purchased the Right Click Keyless Entry system with very little knowledge of how to install.
With a lot of help from a member on here alexperkins, he has been PM'ing all the answers to my questions and problems with in an hour of each other!
Just like to recommend him on the forum and put his name forward as a very helpful member.
Thanks again mate!
Re: Member Feedback!
Posted: Fri Oct 16, 2009 10:47 pm
by alexperkins
my pleasure
Re: Member Feedback!
Posted: Sat Oct 17, 2009 12:05 pm
by Gary Gee
any chance you could send me pics of where the wires get wired to... lol
we tried liek 3 places nd every time i got nowt happening or i got it to lock or unlock but not both altho mine isnt a right click one it just says universal remote keyless entry jobby
Re: Member Feedback!
Posted: Sat Oct 17, 2009 6:02 pm
by alexperkins
You wire onto the pump wiring loom mate in drivers side in the boot
Re: Member Feedback!
Posted: Sat Oct 17, 2009 6:30 pm
by Gary Gee
alexperkins wrote:You wire onto the pump wiring loom mate in drivers side in the boot
we thought that but then cudnt find the wiring diagrams online to find which wires were which .. every site i went on was summin like 6 pin and am sure mines 12 so
Re: Member Feedback!
Posted: Sat Oct 17, 2009 7:42 pm
by alexperkins
pm me with the wires you have on your kit and what they do and ill tell you where to connect them
Re: Member Feedback!
Posted: Sun Oct 18, 2009 1:08 pm
by Gary Gee
alexperkins wrote:pm me with the wires you have on your kit and what they do and ill tell you where to connect them
pm'd altho it did go to my outbox so not sure if you got it or not...
Re: Member Feedback!
Posted: Sun Oct 18, 2009 8:01 pm
by emma_88
I'd also like to big up Alex too. Top lad!
Re: Member Feedback!
Posted: Sun Oct 18, 2009 8:31 pm
by alexperkins
cheers guys and gals
Re: Member Feedback!
Posted: Tue Oct 20, 2009 12:23 pm
by pvr
Add me to the fan club as well
