UK-POLOS.NET - THE VW Polo Forum

i have a 6n2 with no foglights how easy is it to convert them? is the wiring already there or does it need to be done in the manufacturing process?

i think its there

can anyone just confirm this?

Remove the blank foglight covers and you should see the plugs if fitted, they're connected to clips on the inner wings, all you need if the connectors are there is a new light switch with the front fog position, simples!

thanks for the replays guys

is the switch for the rear fog not the same as the front ones?

kingsleysaywell wrote:is the switch for the rear fog not the same as the front ones?

no it's separate, so if your switch doesn't have both on it you need to buy another switch which does support both.

have you got a picture of the new switch i would need ?

They look exactly the same, but pull out once for front fogs, then further again for the rear fog.

oh right thanks

kingsleysaywell wrote:oh right thanks

Actually after looking at it, there's another light to signify the front lights that comes on when they're selected, this is the only visual difference. It's located right next to the rear fog light symbol on the dial.

so does that mean the switch is the same?

No the switches are definitely different, but there is small visual difference to them. The only visual difference being that there is a small front fog icon next to the rear fog icon on the switch.

but i could use the same switch it just wont have the icon? is that right? :S

kingsleysaywell wrote:but i could use the same switch it just wont have the icon? is that right? :S

No because the switch has different modes for each fog. Pull out once for front fogs, twice for rear fog.

Standard switch only has pull out once for rear fog.