UK-POLOS.NET - THE VW Polo Forum

Looking for a part number for the centre trims, not the black plastic ones , but the silver ones that fit flush to the centre of the wheel, i belive they have a small vw logo on the side as well

Ring VW dude, they still make them so could get hold of it no problem if your polite.

Thats the problem, got a part number 191601149 G they say not a good number, i say well thats what is stamped on the back of them, they say tough luck

Try ringing them and asking for them to find you a part number, don't give them that one. If they can't help ring another branch.

357601149D V7L thats the code you need Your missing the colour code off it!

Plus the one you were using is for 14" wheels and not 15

nah number was right, needed a passat code 191601149GWC6 which fits, makes no odds if its a 14 " centre of the wheel is the same 4x100 besides seen the mates g60 steels with these centres , fits fine

either number can be used realistically - that just the 15 inch code. Its also a Golf code aswell the one you specify.

I was gonna put the rest of the 14" one up, but I though it better to use the 15" one.

I bought myself a det of G60 Steels this week to see me through the bad winter months of Jan, Feb and March.

I also got myself a set of the round centre caps that have been mentioned above.

I do have a question about the wheel nuts for these wheels though, will the standard GTI wheels nuts be suitable for the G60 steels?
ie, the nuts that come as standard with the 15" BBS RXII's

Cheers Guys

Yeh they'll be fine mate.

Cheers Tim

another cover is the caddy ones , which are black plastic with the caps for the wheel bolts all in one, slightly smaller than the G60 ones but fit fine, i belive the part number is 1HO 601 171 OIC.
these will fit 14" or 15"
unless someone knows better !

those ones are pretty kl indeed