UK-POLOS.NET - THE VW Polo Forum

would theese alloy wheels fit a vw polo 6n2 ??

there pretty cheap and i can get them refurbished for cheap

http://cgi.ebay.co.uk/4x-16-BBS-5x110-a ... 19ba3e878a

you realise these are 5 stud and our polo is 4 stud right ?, you would need adapters to make them fit

how much are adaptors and tbh no becuase im just new so just learning just now lol

i think this is wat i would need as 4 stud

http://cgi.ebay.co.uk/Volkswagon-polo-G ... 3a580e7111


many thanks

if you buy adapters make sure the wheels would not scratch with the arch when the car is loaded because they will also act as wheel spacers.

I would go for the last set, they are split wheels and better looking. plus imo 15" would feel a bit more comfortable then 16"

btw talking about wheels, so I would not open another thread, would these look good on a polo? : http://maltapark.com/item.asp?ItemID=595914

http://www.ultratuning.com/en/category- ... pters.html

and you would need the 5th ones down, mate to be honest there very similar to the BBS RX2's wich come in 4 stud so would save you buying adapters, people mainly buy adapters for rims like porche tele dials

yes i really wnat to go for them but i live in scotland and there in england awfull far way to go

those adapters are the other way round, not from 4x100 to 5x100, but 5x100 to 4x100, because I think thay could not be swapped around

so they are lol, my mistake

whats the best way to get them from england to aberdeenshire