UK-POLOS.NET - THE VW Polo Forum

hi all, iv'e just connected my rclick box to the central locking pump. (using alex's guide)
And it doesn't work.
is there a button i have to press to power it on?
i plugged in the led to see if i had power, but nothing!

Did you connect the red cable (the one with the fuse) to the power cable on the car?


Also, if you used the splice connectors, make sure that they touch the bare wire, i had to slice mine first to get contact! I will eventually replace them with bullets.

hi, no i connected it to the red and white wire on the boot pump. and im not using them connector's just cutting the wires and joining them.

This helped me. No idea if thats what you followed?

Module ------------ Car
White ---------> White/Yellow
Yellow ----------> Any Red wire (positive)
White/Black -----> White/Green
Yellow/Black ----> (the yellow from the module)
Black --------------> A clean metal surface on the car (or a brown wire)
Red ---------> Any Red wire (positive) ... (i used the thickest)

Will it neither lock OR unlock?

ok, iv'e finally got power to it! but no it doesn't lock or unlock for some strange reason. Any ideas?

You have connected the yellow and yellow black to the positive red/white wire (or the red wire on the module) yes?

yes, is it completely wrong?

No, thats correct.

There have been a new instances of this not working for some reason.

If you can, look in the rclick book and change the wiring to the Pneumatic diagram

sorry, what diagram is it in the booklet?

pneumatic lock mate

Theres no reason it shouldnt work tbf as long as all your wiring is correct!

alex, i think i know why it isn't working! basically it's all connected up. the box work's fine, as it's clicking when i lock/unlock . BUT..i think the central locking pump has stopped altogether. ( when i go to lock the door the other doesnt function) so my question.. what could be wrong with the pump? once the pump works it should be up and running!!

Can you take a photo of the wiring you have put in by the pump - I want to see what you have cut and joined

yeah ill upload some tommorow. But im sure iv'e tripped the pump as it doesn't work now.

Check the fuse for it